Tel.no.: 0755-28688519（8001-8016）
Cell no.: +86 136 4235 8850
Email: szlcauto@163.com
Website: en.lcauto.com.cn
National Service Phone: 400-999-0180
Company Address: 904, Building 1, Geya Technology Building, Mashantou Community, Ma Tian Street, Guangming District, Shenzhen（深圳市光明区马田街道格雅科技大厦1栋904）
Factory Address: No 78 South Section of East 11th Road, Jingkai Dist, Changsha, Hunan（中国湖南省长沙县经开区东十一路78号2号厂区领创智能)
QD-600S Pure Electric Automatic Tunnel Ironing Machine
— First Choice for Small-to-Medium Batch Ironing · Pure Electric Drive · Full-Process Automation
It subverts the traditional steam ironing mode, integrating "ironing + drying + disinfection + impurity removal" into one machine to achieve full-process automation.
Developed exclusively by LC AUTO for the finishing process of small-to-medium batch finished garments, this pure electric tunnel-type ironing equipment breaks the limitation of traditional steam ironing that relies on boilers. With three core advantages—fast temperature control, high energy efficiency, and universal fabric adaptability—it helps garment enterprises achieve cost-effective ironing automation upgrades ("small investment · high return"). It is especially suitable for medium-sized factories with a daily output of 4,000-10,000 pieces and quick-response supply chains.
| Advantage Highlights | Core Value | Data Comparison |
|---|---|---|
| ① Pure Electric Direct Drive · Plug-and-Play | - No need for external steam boilers: No need for steam pipeline layout; direct connection to 380V industrial electricity enables flexible workshop placement and 80% shorter installation cycle - Saves 600 kWh of electricity daily (based on 10-hour operation); energy cost is only 40% of traditional steam models | Traditional equipment: Requires supporting boilers, takes 3-5 days for installation, monthly electricity fee over RMB 20,000→ QD-600S: Ready-to-use upon installation, saves RMB 12,000 in monthly electricity fees |
| ② 120-Second Rapid Temperature Control | - Pioneering patented heating module: Only 6~10 minutes to heat from room temperature to 160℃, supporting quick style changeovers (traditional models take 15 minutes to heat up) - Three-stage independent temperature control (front/middle/rear zones) with temperature fluctuation ≤±5℃, avoiding fabric scorching | Manual ironing: Defective rate 8%-10%→ QD-600S: Defective rate ≤1.5%, fabric color vividness increased by 15% |
| ③ 99.5% Air-Water Separation | - Three-stage filtration system separates 99.5% of moisture in steam; clothing moisture content ≤5% after ironing, directly skipping the drying process and saving 30% of finishing time - No water stain residue, suitable for ironing high-end fabrics (e.g., wool, mulberry silk) | Traditional steam equipment: Requires secondary drying (takes 2 hours), water stain rate 5%→ QD-600S: Saves time and effort in the whole process with more stable quality |
| ④ Universal Fabric Ironing | - Compatible with thick/thin fabrics (over 80 fabric types including knitwear, woven fabrics, blended fabrics) - Inverter-adjustable conveying system (0.5-1.2m/min), suitable for continuous ironing of multiple categories such as T-shirts, shirts, and jackets | Traditional single machine: Only handles single-type fabrics; 30 minutes of manual adjustment for style changeovers→ QD-600S: One-click fabric mode switching, completes model changeover in 5 minutes |
1. Integrated Multi-Process Handling
Ironing & Shaping: High-temperature steam softens fabric fibers, and the hot air unit precisely irons out wrinkles, solving problems like collar creases and cuff deformation.
Drying & Disinfection: Constant-temperature hot air circulation achieves a bacteria removal rate ≥99%, meeting the Class A standard for infant clothing.
Impurity Handling: Built-in high-frequency shaking device automatically removes thread ends, lint, and other debris, increasing the pass rate of post-finishing quality inspection to 99%.
2. Universal Fabric Adaptability
Strong Universality: Supports over 80 fabrics including cotton, linen, chemical fiber, and blended fabrics.
Flexible Parameter Adjustment: Multi-dimensional parameters (temperature: 90-145℃, conveying speed: 0.5-1.5m/min, steam pressure: 0.3-0.6MPa) can be freely combined to meet differentiated process
3. Digital Control
Full Touch Screen: Real-time display of temperature curve, steam pressure, and number of processed pieces.
Fabric Parameter Storage: Can save 999 sets of fabric process parameters (temperature/speed/steam volume), eliminating the need for repeated debugging when switching production models.
4. Energy-Saving Design
Insulation Layer: The outer shell temperature of the equipment is ≤40℃, reducing heat loss and increasing electricity savings by 25%.
Waste Heat Recovery Technology: Uses ironing exhaust gas to preheat incoming air, achieving an energy utilization rate of 85%.
| Item | Value | Item | Value |
|---|---|---|---|
| Power Supply | 380V/50Hz Three-Phase Electricity | Rated Power | 88kW (Pure Electric Heating) |
| Steam Consumption | 120kg/h (Generated by Electric Heating) | Air Consumption | 0.5m³/h |
| Air Pressure Requirement | 0.6MPa | Temperature Control Range | 90-200℃ (Precision ±5℃) |
| Processing Speed | 0.5-1.2m/min (Inverter-Adjustable) | Single Machine Capacity | 400-750 Pieces/Hour (7,000 Pieces/Day on Average) |
| Equipment Dimension (L×W×H) | 6450×2300×2650mm | Weight | 2600kg |
| Applicable Fabric Thickness | 0.1-5mm (Including Composite Fabrics) | Conveying System | Loading & Unloading Racks / Connectable to Automatic Hanging System |
Core Applicable Finished Garments
✅ Basic Styles: T-shirts, shirts, Polo shirts (6,000 pieces processed daily, meeting bulk needs of fast-moving consumer brands)
✅ High-End Categories: Dresses, suit jackets (color activation technology enhances garment quality)
✅ Special Fabrics: Wool sweaters (low-temperature shape-preserving mode), mulberry silk (precise steam pressure adjustment)
Target Customers
Medium-Sized Factories: Replaces 3~4 traditional single machines, saving 40% of equipment floor space and 60% of labor costs (from 5 operators to 1-2 operators)
Quick-Response Supply Chains: 120-second rapid temperature rise + preset program switching, supporting fast delivery of small-batch and multi-style orders (line changeover completed in 2 hours)
Export Enterprises: Certified by CE, compliant with EU and US environmental standards, avoiding compliance risks in overseas markets
If you have any questions about our company's products and services, please contact the following contact information and we will contact you as soon as possible.
Company Address: 904, Building 1, Geya Technology Building, Mashantou Community, Ma Tian Street, Guangming District, Shenzhen（深圳市光明区马田街道格雅科技大厦1栋904）
Factory Address: No 78 South Section of East 11th Road, Jingkai Dist, Changsha, Hunan（中国湖南省长沙县经开区东十一路78号2号厂区领创智能)
Tel. No.：+86 0755-28688519
Cell No.: +86 136 4235 8850 (WhatsAPP)
Business Consulting：400-999-0180
Email：szlcauto@163.com
Copyright ©2019-2022 Shenzhen Lingchuang Automated Technology Co., Ltd All Rights Reserved.
