Tel.no.: 0755-28688519（8001-8016）
Cell no.: +86 136 4235 8850
Email: szlcauto@163.com
Website: en.lcauto.com.cn
National Service Phone: 400-999-0180
Company Address: 904, Building 1, Geya Technology Building, Mashantou Community, Ma Tian Street, Guangming District, Shenzhen（深圳市光明区马田街道格雅科技大厦1栋904）
Factory Address: No 78 South Section of East 11th Road, Jingkai Dist, Changsha, Hunan（中国湖南省长沙县经开区东十一路78号2号厂区领创智能)
QX-1000S Automatic Tunnel Ironing Machine
— High-Capacity · Full-Fabric · Boiler-Compatible Ironing Expert
Efficient collaboration with external boilers, ironing up to 12,000 pieces per day, providing a one-stop solution for post-finishing challenges including wrinkle removal, drying, and impurity elimination.
A pioneering tunnel-type ironing equipment designed for large-scale garment factories and high-capacity scenarios. It requires an external boiler to supply steam and supports efficient ironing of a full range of fabrics such as cotton, linen, silk, and knitwear. Leveraging patented gas-water separation technology and an intelligent constant temperature system, it achieves ironing effects of "no water stains, low energy consumption, and high stability", making it suitable for large-scale production enterprises with a daily output of over 10,000 pieces.
| Advantage Highlights | Technical Value | Data Comparison |
|---|---|---|
| ① 99.5% Steam-Water Separation | - Separates 99.5% of moisture in steam; the moisture content of clothes after ironing is ≤5%, directly eliminating the drying process with no water stains remaining, suitable for high-end fabrics | Traditional equipment: Requires secondary drying (2 hours), water stain rate 5% → QX-1000S: Post-finishing time reduced by 30%, fabric yield rate increased to 99% |
| ② Intelligent Constant Temperature System | - Three-stage independent temperature control (90-145℃) with temperature fluctuation ≤±5℃, accurately matching fabric characteristics- Automatically identifies clothing length and intelligently starts/stops steam nozzles, saving 15% of steam consumption | Manual ironing: Defect rate 8% due to uneven temperature → QX-1000S: Defect rate ≤2%, wrinkle removal rate ≥98% |
| ③ High Capacity & Labor Saving | - Single-machine speed: 800-1200 pieces/hour; daily ironing capacity: 12,000 pieces (8-hour full load)- Only 1-2 operators required (5-6 operators for traditional equipment) | Traditional single machine: 600 pieces/hour, 3 operators needed, 30 minutes for model change → QX-1000S: Efficiency increased by 100%, labor cost reduced by 60% |
| ④ Energy Optimization Design | - Machine body covered with 5cm heat insulation cotton, external temperature ≤40℃, reducing heat loss; shared heat source technology improves energy utilization by 20%- Power: Only 18kW (average power of same-capacity equipment ≥25kW); combined with boiler waste heat recovery, comprehensive energy consumption reduced by 25% | Similar equipment: High energy consumption and obvious heat dissipation → QX-1000S: Energy-saving and low-carbon, meeting the requirements of dual carbon policies |
1. Multi-process Integrated Processing
Ironing and Shaping: High-temperature steam softens fabric fibers, and the hot air unit precisely irons flat, solving problems such as collar wrinkles and cuffs deformation.
Drying and Disinfection: Constant temperature hot air circulation, bacteria removal rate ≥99%, meeting Class A standards for infant clothing.
Impurity Treatment: Built-in high-frequency shaking device automatically removes thread ends, lint, and other debris, increasing the post-finishing quality inspection pass rate to 99%.
2. Full Fabric Adaptability
Strong Versatility: Supports over 80 fabrics including cotton, linen, chemical fiber, and blended fabrics.
Flexible Parameter Adjustment: Multi-dimensional parameters such as temperature (90-160℃), conveying speed (0.5-1.5m/min), and steam pressure (0.5-0.8MPa) can be freely combined to meet differentiated process requirements.
3. Digital Control
Full Touch Screen: Real-time display of temperature curve, steam pressure, and processed quantity.
Fabric Parameters: Can store 999 sets of fabric process parameters (temperature/speed/steam volume), eliminating the need for repeated debugging during model change production.
4. Energy-Saving Design
Insulation Layer: Equipment shell temperature ≤40℃, reducing heat loss and improving power saving rate by 25%.
Waste Heat Recovery Technology: Uses ironing waste gas to preheat incoming air, with energy utilization rate reaching 85%.
| Item | Value | Item | Value |
|---|---|---|---|
| Applicable Fabrics | Cotton/linen/silk/knitwear/blended fabrics, etc. | Temperature Control Range | 90-145℃ (accuracy ±5℃) |
| Steam Consumption | 240kg/hour (external boiler required) | Air Consumption | 0.5m³/hour |
| Processing Speed | 0.8-1.5m/min (frequency conversion adjustable) | Single-Machine Capacity | 800-1200 pieces/hour |
| Power | 18kW | Voltage | 380V/50Hz Three-Phase Power |
| Equipment Dimensions (L×W×H) | 9130×2350×2650mm | Weight | 3500kg |
| Staff Configuration | 1-2 persons (loading and unloading) | Compatible Boiler Pressure | 0.5-0.8MPa |
Application Scenarios
Core Applicable Finished Garments
✅ Basic Styles: T-shirts, shirts, Polo shirts (12,000 pieces processed daily, meeting bulk needs of fast-moving consumer brands)
✅ High-End Categories: Dresses, suit jackets (color activation technology enhances garment quality)
✅ Special Fabrics: Wool sweaters (low-temperature shape-preserving mode), mulberry silk (precise steam pressure adjustment)
Target Customers
Large-Scale Factories: A single machine irons 12,000 pieces daily, replacing 5 traditional devices. It saves 50% of floor space and 70% of labor costs (from 8 operators to 1-2).
Quick-Response Supply Chains: 120-second rapid temperature rise + 15 fabric presets support mixed-line production of multiple styles, enabling fast switching from sampling to mass production.
Export Enterprises: Certified by CE and, compatible with European, American, and Southeast Asian voltage standards. Shortens overseas installation cycles by 60%.
High-End Brands: Color activation technology increases garment vividness by 20%; wool sweater shrinkage rate ≤2%, meeting luxury-level shaping requirements.
If you have any questions about our company's products and services, please contact the following contact information and we will contact you as soon as possible.
Company Address: 904, Building 1, Geya Technology Building, Mashantou Community, Ma Tian Street, Guangming District, Shenzhen（深圳市光明区马田街道格雅科技大厦1栋904）
Factory Address: No 78 South Section of East 11th Road, Jingkai Dist, Changsha, Hunan（中国湖南省长沙县经开区东十一路78号2号厂区领创智能)
Tel. No.：+86 0755-28688519
Cell No.: +86 136 4235 8850 (WhatsAPP)
Business Consulting：400-999-0180
Email：szlcauto@163.com
Copyright ©2019-2022 Shenzhen Lingchuang Automated Technology Co., Ltd All Rights Reserved.
