How to clean the garment folding packaging machine regularly, the following is the answer by the collar editor:
The garment folding packaging machine must be operated by a fixed person to operate the packaging machine equipment, and can master the booting, bag making procedures, simple instrument debugging, changing parameters, etc.; mechanical instrument debugging personnel must be strictly controlled by Yujie manufacturers. Instrument performance, work procedures, operating modes, working conditions, common troubleshooting and handling; no computer operation is strictly prohibited. Daily maintenance must ensure that the inside and outside of the computer instrument box are clean and dry; the terminal is not checked for looseness or falling off at regular intervals. Ensure that the circuit and air path are normal.
The basic cleaning of the garment folding packaging machine includes:
1. After the shutdown, the metering part should be cleaned in time, and the cleaning tray and turntable should be cleaned every time to avoid corrosion.
2. For the heat seal body, it should be cleaned frequently to ensure the clear texture of the seal.
3. Photoelectric tracking light head, that is, electric eye, should also be cleaned regularly to ensure small error of cursor tracking.
4. The materials scattered on the tray should be cleaned in time to keep the parts clean.
5. Regularly clean the dust inside the electric control box to prevent malfunctions such as poor contact. The newly installed machinery of the garment folding packaging machine shall inspect and fasten the transmission and moving parts within one week of use, and shall be refueled and maintained;
Basic maintenance of clothing folding packaging machine:
1. Regularly check the screws of each part of the packaging machine to avoid looseness.
2. Pay attention to the waterproof, moisture-proof, anti-corrosion and anti-rat parts of the electrical parts. The electrical control box and terminal block should be kept clean to prevent electrical failure.
3. When the machine is stopped, the two heat sealing rollers should be in the open position to prevent the packaging material from being burnt.
4. Regularly lubricate the gears of the garment folding and packaging machine, the bearing oil filling holes and the moving parts with oil. When filling the lubricating oil, please be careful not to drop the oil on the transmission belt to prevent the slipping or the belt from aging damage.